Parliamentary Committee Notes: Radio Frequency Filtration Equipment

2022-2023 INDU – Contract for a Telecommunications System for the RCMP
Date: January 20, 2023
Classification: Unclassified
Fully releasable (ATIP)? Yes
Branch / Agency: RCMP

Proposed Response:

If pressed on the Security of RF filtration equipment:

If pressed on the security of antennas procured from Sinclair Technologies:

Background:

All radios create, and are susceptible to, radio frequency (RF) interference. At radio sites, RF filters stand between antennas on the tower and two-way radios in the shelter, rejecting interference from nearby transmitters and passing only the correct frequencies to RCMP radios. Most RF filters are unpowered assemblies of tin cans, metal rods, magnetic ferrite blocks and coaxial cables.  Some incorporate transistor-based amplifiers to boost faint incoming signals. The rods allow the cans to be tuned to precise frequencies and are used in equipment such as broadcast radio, wireless communications, and television. This equipment is used to optimize radio system performance and reduce impact on nearby services like cellphone, pager and satellite operations.  Once installed and tuned, they typically remain in place for decades.

RF filters exchange no data with other equipment and are used to filter out unwanted signals.  RF filtration equipment does not have the capability to access RCMP radio communications and poses no security concerns.

RF filters have several benefits.

Radio antennas are passive devices used for only two purposes: 1) To send radio signals from transmitter radios to field personnel; and, 2) To capture radio signals and send the signal down a wire to receiver radios. 

An antenna is considered passive as it only transmits the input signal received to other devices. RF antennas do not pose any security concerns with regard to access to data or voice information as they simply redirect energy. They are installed on towers and rooftops where they often remain for decades with little maintenance required beyond periodic inspection to ensure bolts are tight and cables are sealed.

Contacts:

Prepared by: Cameron Scobie, Senior Policy Advisor – Specialized Policing Services, 343-549-2681
Approved by: Bryan Larkin, Deputy Commissioner – Specialized Policing Services, 613-843-4631

Date modified: